Corporate Headquarters 7070 S. Tucson Way Englewood, CO 80112 USA Toll Free: 1-800-280-6113 Local: 1-303-649-1000 Fax: 303-649-9710 Web Site: www.lasertech.com

Put the tape wheel and clipboard down and step away from the past.  The beauty of LTI’s mapping solution is that we built it from the ground up with you in mind.  Guess what?  You don’t have to become a licensed surveyor to be an effective crash scene investigator.  LTI’s QuickMap 3D requires minimal training and can be set up and running in less time than you may think. 

Let’s face it, time is of the essence when it comes to crash scene mapping.  Clearing a scene as quickly as possible is one of the safest things you can do.  Managing traffic around a crash scene is dangerous for everyone.  So where is the solution that gives you the ability to clear a scene in a timely manner and collect accurate enough data for courtroom integrity?LTI’s QuickMap 3D.  

Choose between 3 mapping techniques, which most of you are already trained in, such as the Baseline Offset routine.  Why is this important?  Since every scene you encounter is most likely different, having the ability to adapt the way you take measurements can make things so much easier and safer.  Sometimes taking baseline offset shots is the safest because you don’t have to occupy the scene that may be too close to oncoming traffic.  Sometimes the radial with angle technique makes the most sense because you typically only need to establish one control point and then collect all the data you need with minimal movement.  NOTE:  To perform radial with angle, an LTI MapStar Angle Encoder is required.

Touch screen menus, universal icons and unbeatable simplicity all hooked up to your UltraLyte laser that you just used to pull over a speed violator!  If you are involved in speed enforcement AND crash investigations, then the UltraLyte 200 was made just for you.  Instantly toggle your laser from speed mode to survey mode and start taking height and distance measurements.  Add a MapStar Angle Encoder and map anything you see in 3D! 

Run QuickMap 3D on one of the most rugged field data collectors on the planet – the TDS Recon. Collect and store all your points with the Recon’s touch screen activation.

LTI has put together mapping packages that cater to various skill levels and budgets.  For example,

Total AI Kit – (Seen on left) includes: an Impulse (range and height only) laser, monopod and data collector plate for the Recon.

Angle Encoder Kit – (Seen on right) includes: an Ultralyte 200 (range, height and speed) laser, a MapStar Angle Encoder (for radial with angle mapping), tripod and tribrach (for easier leveling), and a data collector clamp for the Recon.

To finish off your complete mapping package, you need one of the easiest to learn diagram software. 
For 10 years The Crash Zone has been the drawing program of choice for Accident Reconstructionists who insist on functionality, precision, and ease of use.

The new Crash Zone Version 8 has even more tools for crash investigators, including easy 3D animations, a vehicle specifications database, skid analysis and momentum calculations, and an easy-to-use 3D body poser! No special training is required! Free Technical Support!

When you research all the alternatives of mapping / measurement equipment, consider the following:

Is there value for you to purchase a laser that does both speed and crash scene mapping?
    
How much training is required to start mapping a scene?

How long does is take now to map and clear a scene? 

When it comes to saving time and increasing safety, isn’t upgrading your mapping equipment worth it?

Corporate Headquarters
7070 S. Tucson Way
Englewood, CO 80112 USA
Toll Free: 1-800-280-6113
Local: 1-303-649-1000
Fax: 303-649-9710
Web Site: www.lasertech.com